TBS G2 Frame 7" - Carbon Fibre

Overview:

The G2 is concept drone inspired by the XBR220 from BlackBoltRC, aimed at studying aerodynamics and advanced materials in racing frames. We finally decided to bring it to market!

The box layout provides the necessary strength and allows to make the arms thinner, allowing the motors to turn out more thrust. In fast forward flight, the light weight of the frame paired with its insane power to weight ratio can be flown almost at 90 degrees. With an unbeatable center of mass, cornering and maneuverability will almost feel unreal.

Aimed at using the TBS PowerCube or similar AIO solutions, you can build this puppy up however you'd like. We do not suggest arm-mounted ESC's as the current arms are so thin to reduce the amount of airflow, and centrally placing the ESC's is key to this design. The TBS FPVision OSD & VTx, with the TBS PowerCube ESC's make this a very easy-to-assemble solution.
The remaining accessories include the highest quality aluminum screws, purple anodized, and nuts, straps and battery rubber pads. Only the highest quality was good enough!

Specifications:

- MTM Size: 258mm
- Baseplate: 78g
- Screws: 4g
- Typical AUW: 310g
- Application: Long Range
- Recommended Motors: TBS Endurance
- Props: HQ 7x4.5
- Flight Time: 20-40 minutes

Included:

- 1x TBS G2 7" frame, made out of TBS-Carbon
- 1x PC Camera Mount for ZeroZero (V2), HS1177, etc for HERO style frame
- 24x M3x9mm Black steel screws with loctite pre-applied
- 2x M3x12mm Aluminum T7051 purple anodized
- 4x M3x19mm Aluminum T7051 purple anodized
- 4x Copper PowerCube Nuts
- 1x TBS Battery Strap