Realacc RX5808 Pro FatShark Diversity Module With AchilleΣ Firmware

Notice: Please put the receiver cover on before installing the module in the goggles to avoid breaking the OLED screen.

Overview:

Realacc RX5808 Diversity module with integrated OLED screen and cover. Comes pre-flashed with AchilleΣ firmware and calibrated by us. (By agreement we donate €5 for every module sold to the developer GC9N to fund continued development). 

Features:
- Supports upto 583 Channels!!! (Not 48 or 72 like normal receivers)
- Ultra Search , Starts to search into the predefined band-channels until the desired frequency found. If that happens AchilleΣ auto tunes -3Mhz up to +3Mhz and votes for the channel with the best RSSI.
- Manual search but with the ability to search Mhz by Mhz over the band. With a single click, jumps over predefined frequencies and by holding the up or down button allows fine tuning over each MHZ.
- EVENT mode , Searching down all the 5.8 band and keeps in memory only the running channels, then you can browse them one by one.
- FAST mode , a very handy feature to find very fast a frequency or a band.
- Favorite channels up to 10. You can save predefined band channel or even a custom frequency. Start Up channel selection.
- RSSI Filtering , you can choose for Fast, Normal, Low RX changes.
- Buzzer Alarm for Low level RSSI 10%,20%,30%.
- FoolProof RSSI Calibration
- RSSI Scan Reads. you can change the average scans for RSSI Reads.
- Added Statistics with percentage for antennas switching.Statistics run and counts when module enters in screen saver mode, if you hit any button you will reset them at once.
- Find Model, Add a patch Antenna to bottom RX (A) and point to the place that the drone might lost , the Graphic interface + buzzer will guide you.
- Band Scanner is scanning with predefined channels (48) not the entire 5.8 band. This might be an option if required in the future to toggle for a full scan
- Nice and Easy User Interface.
- Buzzer support.

Included:

- Realacc Module RX5808 Pro, pre-flashed with AchilleΣ firmware and pre-calibrated/tested by HobbyRC (SMA Connectors)
- Buzzer
- White dual hole Dominator cover