Matek XT60 PDB XPW (5V & 12V BEC + 140A Current Sensor)

Overview:

The PDB-XPW distributes power from a LiPo pack to 4 ESCs as well as providing syncronised & regulated DC 5V outputs and linear regulated DC 12V for powering cameras, VTXs etc.

The board also features a built-in 140A current sensor module and offers an XT60PW socket to connect the LiPo pack conveniently.

Specifications:

- Input voltage: 9 - 21VDC (3S-5S LiPo)
- PDB: 4 x 35A
- Regulated 5v and 12V outputs
- Current module 140A
- LED power indicators (5V & 12V outputs)

Current Module
- 140A
- 3.3V ADC

BEC 5V output:
- Designed for RC Receivers, Flight controllers, OSD etc
- DC/DC synchronous buck regulator
- Voltage 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max 2.5A 10s/minute)
- Output Ripple: 40mV (Vin=16V, Vout=5V@2A load)
- Short-circuit tolerant (5 seconds/minute)

BEC 12V output:
- Designed for Video TX or FPV camera with linear regulator
- The battery should be 4-5S LiPo (13-21V DC)
- Voltage 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max 0.8A 5s/minute)
- Short-circuit tolerant (2 seconds/minute)

BEC 12V @ 3S LiPo
- Output voltage = 3S LiPo voltage -1V

Physical:
- Mounting: 30.5 x 30.5mm
- Dimensions: 35x50x4mm (w/o XT60PW), 36x58x10.5mm (w/XT60PW)
- Weight 8.5g (w/o XT60PW), 13g (w/XT60PW)

Included:

- PDB
- Nylon Standoff (Nuts, Screws, standoffs)