Matek F411 WSE Wing Flight Controller
Overview:
The Matek F411 WSE Wing is a dedicated ultra compact flight controller for fixed wing. More compact than the F411-Wing but still fully featured. The Flight Controller features multiple high output BECs, 5V/3.5A for servos and 5V/2A for accessories like GPS module, RC receiver etc. The Matek F411 WSE-Wing also has a number of built in features like 2 Uart ports, BMP280 Barometer and built in OSD (On Screen Display). The Matek F411 WSE also support dual switchable camera inputs.
Features:
- MCU: 100MHz STM32F411CEU6
- IMU: MPU6000 accelerometer/gyro (SPI)
- Baro: BMP280 (I2C)
- OSD: INAV OSD w/ AT7456E chip
- Blackbox: No
- 2x Uarts
- 2x Softserial
- 2x Motors, 4x Servos outputs
- 1x I2C
- 4x ADC (VBAT, Current, RSSI, Air Speed)
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- Switchable dual camera inputs
- TR/SA VTX control: Yes
- WS2812 Led control : Yes
- Beeper output: Yes
- RSSI: Yes
- Voltage devider for Analog Airspeed sensor: Yes
FC Firmware
- INAV Flight
- Target: MATEKF411SE
PDB
- Input voltage range: 6.5~30V (2~6S LiPo)
- 2x ESC power pads
- Battery Voltage Sensor: 1:10 (Scale 1100)
- Current Senor: 78A, 3.3V ADC, Scale 423
BEC 3.3V output
- Designed for Baro / Compass module and Spektrum RX
- Linear Regulator
- Continuous current: 200mA
BEC 5V output
- Designed for Flight controller, Receiver, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed module
- Continuous current: 2 Amps, Max.3A(5seconds/minute)
BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V option
- Continuous current: 3.5 Amps, Max.5A(5seconds/minute)
BEC 3.3V output
- Designed for Baro / Compass module/OLED and Spektrum RX
- Linear Regulator
- Continuous current: 200mA
Physical
- Mounting: 24 x 24mm, Φ2mm
- Dimensions: 28 x 28 x 14 mm
- Weight: 8.5g
Included:
1x Matek F411 WSE Wing Flight Controller