Matek CRSF to 8Ch PWM Converter

Overview:

The Matek CRSF 8 channel breakout/converter board is designed to accept a CRSF (Crossfire protocol) signal and allow 8 PWM (e.g servos, ESC) devices to be connected. In addition the board features configurable PWM frequency output, built in 5.5-30V battery voltage input for telemetry. The board also features 2x uarts to allow for connection of a GPS receiver (NMEA output), which then transmits the coordinates along with the Crossfire Telemetry. The board includes a 5V BEC which provides upto 5A continuous output to power servos etc.

Specifications: 

- Compatible with CRSF protocol receiver only
- Support any CRSF protocol receivers (including 433MHz, 868MHz, 915MHz, 2.4GHz)
- 8x PWM outputs
- PWM frequency configurable (50Hz default, 100,160,330, 400Hz)
- 2x UARTs (for Receiver and GPS)
- Telemetry ID: RxBt, Curr, Capa, Bat%, GPS, GSpd, Hdg, Alt, Sats
- 5.5~30V battery voltage input @ Vbat pad
- BEC 5V built-in (5A continuous /6A Peak)
- Compatible with external Current sensor (0~3.3V)
- Vbat and Current sensor scale configurable
- Firmware upgradeable
- 33mm x 21mm, 4.6g
- Packing: 1x CRSF-PWM-B, Dupont 2.54 pins

Includes:

- 1x Matek CRSF to 8Ch PWM Converter
- Dupont Pins