Dquad Obsession V3 FPV Frame

Overview:

The Dquad Obsession is a Strong lightweight 5" X frame that is suitable for race/freestyle and advanced/intermediate/beginner pilots.

This frame is easy to build and to service when needed. The frame has 4 swappable 4mm carbon arms that come together in the middle without any movement. Why not have a unibody that is 2 gram lighter? That’s because we like to give the pilots an opportunity to get up in the air asap and that’s only possible when you have those nice swappable arms. These 4 arms are held together with a 2.0mm carbon bottom plate and a 2.0mm identical Top plate. The arms are also replaceable without stack bolt removal ensuring quick hassle free arm replacement. It's also possible to build it with the included 2.0mm thick PDB which makes it really nice. The PDB is not one with lots of features on it. We like to keep this clean and simple therefore it has only the + and – on it for the esc’s, power connector, and extra’s. For instance you can use it to power single escs, or you can tap off any + and - to power your aio. On top of the PDB or top plate is enough room to double stack your hardware, like FC, 4in1 esc, VTX, RX, and so on. The xd connector is held in place with a 7075 Aluminum mount which prevents dangling power wires and ensures clean builds.

Then we have our 7075 Aluminium roll cage that has two 1.5mm carbon side plates that holds the FPV cam in place. On the backside of the roll cage you will find a 2mm carbon VTX antenna mount. This VTX antenna mount is installed in a 45 degree angle which provides the best signal strength and protects the antenna in the event of a crash. The roll cage also comes equipped with a rigid hd camera mount system which allows for a wide array of gopro mount options

Features:
-Armattan high-heat pressed 3k Twill Weave Carbon Fiber
-7075 aircraft grade aluminum cage and xt60 mount
-Integrated Dquad pdb and xt60 connector
-Good air flow
-Hd compatible
-very stiff frame easy to tune
-Strong as a tank!


Specifications:
- 210mm size 5” true X frame
- Carbon: Armattan high-heat pressed 3k Twill Weave Carbon Fiber
- Supports 30x30 and 20x20 stacks
- Frame weight 105 gram

Included:

- 1x Dquad Obsession V3 5" Frame