TBS Graphene 300mAh 1S LiHV 30~60C LiPo Battery with JST-PH2.0 Connector

The TBS Graphene packs are here! You get power when you need it, without regret. It takes a lot of abuse and doesn't set you back much from the start. The high discharge rate will provide a stable voltage despite high amp draws, without sacrificing the lifespan of the battery.

The connector used by this battery is a Micro JST 2.0 (AKA PowerWhoop connector) which is used by new generation TinyWhoops like the BetaFPV 75X or Eachine QX65.

The TBS 1S LiPo is available as either a 260mAh (discontinued), 300mAh or 340mAh battery - please select as required.

What's HV?

AKA LiHV battery or HV Lipo battery. It can be charged to either standard voltage (4.2v, 230mah) or high voltage (4.35v, 250 mah). Charged to high voltage the battery will give you higher rpms (more power) and a considerably longer flight time - please note you will need a charger that supports charging LiHV batteries.

What is Graphene?

Graphene is composed of a sheet of carbon atoms bound together in a honeycomb lattice pattern, and is recognized as a “wonder material” due to the myriad of astonishing attributes it holds, including improvements to batteries. The graphene particles form a highly dense compound allowing electrons to flow with less resistance compared to traditional Lipoly battery technologies. The result is a battery capable of maintaining greater power output whilst remaining much cooler under load. Since heat and resistance are the natural enemy of batteries, Graphene chemistry has significantly reduced these problems and the result is an incredible boost in cycle life. 

We can only ship these with courier, please select the DHL shipping option at checkout.

Advantages over traditional LiPo batteries.

• Stable High pack voltage through duration of use. 
• High discharge rate, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, packs stay much cooler under extreme conditions
• Higher capacity during heavy discharge.
• Maintains higher pack capacity even after hundreds of cycles
• Longer Cycle Life