Matek F722-STD F7 Betaflight Flight Controller w/ OSD & Baro

FLIGHT CONTROLLER F722-STD

STM32F722RET6, ICM20602, BMP280, BFOSD, SD Card Slot, VCP+5x UARTs, 6x PWM / DShot outputs

Make the podium everytime with this up to date flight controller that will get the best out of you and your racing quad. The F722-STD is the latest flight controller from Matek, it has a built-in Betaflight OSD, BMP280 Barometer and up to 32k gyro performance. The board runs a high speed 216MHz STM32F722RET6 MCU, 6-Axis ICM20602 gyro and has a bottom mounted Blackbox MicroSD slot. This FC runs on Betaflight and the MatekF722 target. The board is compatible with the optional FCHUB-6S PDB or FCHUB-VTX board for a very compact build.

This board has very many features and is of a high specification, please see below for the complete list.

Features:

• 3 x LED's for FC status (blue/red) and 3.3v indicator (red)
• 7 x PWM/Dshot outputs without conflict
• 5 x UART's
• 1 x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
• 4 x Pairs of corner pads for ESC Signal/GND connections (Dshot compatible)
• 1 x Side press button for BOOT(DFU) mode
• I2C1 SDA and SCL
• 16Pin bottom mounted FFC Slot for FCHUB-6S or FCHUB-VTX connection
• F722 has built in inverters. SBUS, DSM, IBUS, SUMD can be connected to any unused UART_RX
• FrSky SmartPort, Tramp & Smart Audio can be connected to any unused UART_TX
• S6 pad (PA8) can be resourced to Camera Control
• PWM pad (PB8) can be resourced to Camera Control

Recommended PDBs:

Matek FCHUB-6S

or

NEW Matek FCHUB-VTX - Like the FCHUB but with a built in VTX!

Drivers & Softwares

• Zadig 2.3
• STM32 Virtual Com Port driver
• STM32 Virtual Com Port driver x64
• STM Flash Loader Demonstrator
• STM DeFuse Demo v3.05

BetaFlight Github

• BetaFlight GitHub
• BetaFlight FW Releases
• BF lastest build  https://ci.betaflight.tech/

BetaFlight Firmware

• Betaflight_3.2.5_MATEKF722
• Betaflight_3.3.1_MATEKF722