Holybro Kopis 2 6S V2 FPV Racing Drone - Plug-n-Fly (PnF)

For those that don't have the time to build a world class freestyle drone, this is the one for you! If you’re looking for a BNF racing drone, you’ve found one of the best. Professional build quality, great case, and tons of power.

The Kopis 2 is a high-performance ready-to-fly FPV racing drone from Holybro.

Low-deck design means centralized mass and excellent handling. Stretched-X motor layout is the choice of top racers because the rear props are further from the dirty air coming from the front props. The result is smoother cornering and higher top speed.

The FPV antenna is in a unique location behind the quad, to protect against damage. Kakute F7 flight controller and Atlatl HV V2 video transmitter give perfectly integrated control of all quadcopter systems. T-Motor F60 Pro-III 1750kv motors give awesome power and speed, just like top racers. RunCam Robin Micro camera is light and small, with great image quality.

Kopis gives all the performance, looks, and durability of a hand-built machine, without ever having to pick up a soldering iron!

This is the latest '6S V2' Version of the Kopis 2 with the following changes over the previous 'SE / 6S V1' Model:

• 5mm 3K full carbon fiber is now used for both the frame and arms.
• Revised arms with rigid press nuts for fastening the arms securely.
• Flight stack upgraded to KakuteF7 V1.5+Tekko32F3 40A 4in1 ESC Combo which brings in better reliability.
• Motor changed to the F60 PRO III 1750KV which is designed to work efficiently with 6S battery.
• ESC installation rotated to provide better protection for power connection.
• Camera upgraded to Foxeer Micro Razer 12000TVL.

Note: The BNF comes with a Frsky R-XSR Receiver (NON EU LBT, if you require LBT we can fit one for you, please contact us). The PNF version requires a receiver. You must use a receiver that supports a serial protocol such as SBUS, iBus, and Spektrum Satellite. You cannot use a PPM or PWM receiver with the Kakute flight controller on the KOPIS.

Features:

• Super strong 3K carbon fiber frame (5mm thickness)
• Counter-sunk screws on base for great appearance and protection of battery against damage
• Latest Kakute F7 flight controller with soft-mounted gyro sensor for mechanical filtering of vibration
• Improved soft-mounting foam for KakuteF7 gives an optimal balance of stiffness and damping for even better gyro performance than before!
• Betaflight OSD included. Monitor voltage and battery capacity in your FPV goggles. Change PIDs and Rates using your transmitter sticks
• Serial receiver supported (SBUS, iBUS, Spektrum) 
• Atlatl HV V2 video transmitter (5.8GHz, 40CH, 25mW, 200mW, 500mW, 800mW)
• T-motor F60 PRO3 1750KV brushless motors
• VTX telemetry & On-board buzzer
• 1200TVL Foxeer Micro Razer FPV camera with angle adjustment - 0 degrees to 90 degrees
• DALPROP Cyclone 3-leaf propellers
• Supports 6S Li-Po batteries (4S also compatible)
• Large top plate for second DVR camera (GoPro Session or Hero)
• Weight 325 grams without battery & props

The Kopis 2 6S PNF & BNF comes complete with a carry case

Please Note that the exact specification of the Kopis 2 is subject to changes as Holybro update and improve components. If you would like to check the current specification please contact us.