Hobbywing XRotor Micro Flight Controller F4 G3 with Bulit-in OSD & Blackbox

This is the 3rd generation (G3) F4 Flight Controller from Hobbywing.

Updates over the previous version include the new edition of a 12V 2A BEC for powering FPV gear and auxiliary accessories, a PIT switch for controlling a VTX, revised LED output which supports WS2812B LED strip without requiring a CLI command, revised VTX connection which supports both a plugin connection or direct solder. There's also plug and play support for the new XRotor 60A 4-in-1 ESC providing a clean and easy installation for your next build.

Features:

• Super-high Running Frequency
  STM32 F405 MCU allows the FC to run the PID looptime and gyro refresh frequency at 32KHz.
• DShot 150/300/600/1200, Oneshot125, Oneshot42, Multishot Modes Supported
  Besides the latest Dshot 150/300/600/1200 mode, the FC also supports the regular PWM mode, Oneshot125 mode, Oneshot42 mode and Multishot mode.
• Multiple Rx Protocols Supported
  Compatible with various receivers likes SBUS, SUMH, SUMD, SPEKTRUM 1024/2048, XBUX, PPM, etc. 
• TF-card Insertion Supported
  Use a micro SD card to record flight / back box data to assist with tuning and diagnostics.
• Onboard OSD Microchip
  Onboard OSD microchip allows users to easily adjust various (OSD) parameters via the Betaflight/Cleanflight software.
• BetaFlight/Cleanflight Firmware Ready
  The FC which supports Betaflight/Cleanflight firmware & allows parameter adjustment via Betaflight /Cleanflight software is more applicable to FPV flying & racing.
• Onboard 12V BEC
  Use the onboard BEC to power FPV gear and auxiliary accessories.
• Onboard PIT Switch Module
  The PIT switch can be used to remotely turn on / off your VTX.
• Stack neatly with the Hobbywing 4IN1 ESC
  It’s easy to wire and install when pairing the FC with a Hobbywing 4-in-1 tower 60A ESC.