Hobbywing XRotor 30A 2-4S BLHeli-S Dshot600 ESC

Another high performance ESCs from Hobbywing. The Hobbywing XRotor Micro 30A 2-4S compatible ESC offers a continuous rating of 30A and supports bursts of up to 40A. The firmware is BLHeli-S supporting all BLHeli functions and ESC programming via the signal cable.

Small lightweight and ease of installation with the convenient solder pads make these feature packed ESC's a great addition to your 130~280mm racing drone frame.

Features:

High Performance Hardware

The use of EMF8BB21F16G MCU (with the operating frequency of up to 48MHz), American Fairchild MOSFETs, imported 3-in-1 drive IC and quality ceramic capacitors, 3-ounce copper and 4 layers of PCBs guarantees less heat, higher efficiency and rapider response.

Hardware Generated PWM & Damped Light Mode
The ESC firmware uses hardware generated motor PWM for smooth throttle response and silent operation. Damped light does regenerative breaking, causing very fast motor retardation, and it inherently also does active freewheeling.

DShot150/300/600, Regular PWM, Oneshot42/125 & Multishot Supported
Besides the regular PWM (1~2ms) mode, Oneshot125 (125~250µs)/Oneshot42 (41.7~83.3µs)/ Multishot (5~25µs) modes, the DShot150/300/600 modes are also supported. 

Multiple Programmable Items
The original BLHeli-S firmware allows users to connect four ESCs to the FC flashed with the Cleanflight/Betaflight firmware via signal cables (on the ESCs) to set general parameters of the ESCs simultaneously, upgrade the firmware or adjust advanced parameters online at the same time.

Multiple Protections
Multiple protection functions like motor lock-up protection, temperature protection, low RPM power protection, low-voltage protection and current protection effectively prolong the service life of the ESC.