DYS XML20A BLHeli Multirotor 3-4S OPTO 20A Slim ESC

Messy quad builds, if you ask us, ESCs are the problem. They have 7 wires leading from them, which is a recipe for untidiness. While you can't remove the wires, you can hide them and this ESCs lets you do just that. The XML20A is unique in that it is probably one of the slimmest 20A ESCs on the market. Measuring just 8.5mm wide, it will fit inside tubes as narrow as 10mm. So if your multirotor uses carbon tubes, this is the ESC for you.

The XML20A is one of DYS's new XM series ESCs. The XM series feature the latest in ESC technology. The XML20A in particular features the new Silicon Lab 8051 series processor, which has a running speed of 50MHz, the SN/BL series ran at 16MHz. The extra processing capability makes it particularly suited to high KV motors and helps to delivery an even faster throttle response making it a great choice for racing and acrobatic mini quads. Additionally the drive circuit has been upgraded to ultra-low resistance MOS, which improved the overall efficiency and reliability.

The DYS XM ESCs arrive factory-flashed with BLHeli firmware, supporting OneShot125 and damped mode to give ultra fast throttle response. For those than don’t know, BLHeli is a next generation firmware which looks set to take over from the dominance of SimonK firmware. BLHeli offers great new features like OneShot125* and Damping Light. OneShot125, simply put is a feature that lets your flight controller communicate with your ESCs much faster; the result being your multirotor can respond much quicker to commands. On the other hand Damping Light is a sort of active breaking. With normal ESCs when you reduce the throttle, the motor will only be slowed down passively by the drag of the props. With Damping Light enabled, the ESC will act like an electronic brake to actively reduce the motor speed. Again, this feature makes for a much more responsive and stable multirotor. While OneShot125 and Damping Light are the killer features of BLHeli, there are other benefits. For example, you can configure the ESCs to sound a beacon if they sit idle for 10minutes, which might just help you find your racing quad if you crash it in a field of long grass.

Thankfully the configuration is made easy by the BLHeli software suite, and connecting them to a computer is also straightforward. The DYS XM ESCs support configuration via your flight controller. This means you don't need to remove them from your drone or even use a USB linker (although this is also supported - compatible USB linker). Simply install betaflight (instead of cleanflight) on the FC and download the latest BLHeli suite - more instructions here.

The DYS XM 20amp ESC is avaible in three formats:

• XM20A V1 - no motor wires, direct solder pads, reduces weight and lends itself to neat installations
• XM20A V2 - identical to V1, but with soldered motors wires
• XML20A - super slim, can be installed within a 10mm tube

Features:

• XM sereies upgraded from BL/SN series, new SiLabs 8051 microprocessor
• BLHeli 14 and OneShot125 ultra high speed preinstalled
• Includes BLHeli Boootloader - supports ESC programming via FC.
• Dampened Light (active braking) enabled
• Super Slim, can be fit inside a 10mm tube
• Fast throttle response – high 500Hz throttle refresh rate compatible with all flight controllers
• Supports high KV motors
• Twisted signal cable reducing the crosstalk during signal transfer
• New ultra-low resistance MOSFET for superior current handling

NOTE: These ESCs have no BEC, they are OPTO. You will need a 5V BEC to power your flight controller/receiver.​

*Your flight controller must support OneShot to take advantage of this feature.

For more information about BLHeli, please refer to the BLHeliSuite website.