Arkbird Battery Current Sensor with 12V Regulated Output

The Arkbird 2.0 Autopilot is compatible with a current sensor that allows you to monitor the status of your flight battery via the OSD. The standard current sensor that ships with the Arkbird 2.0 is compatible with a 3S LiPo only. This upgraded module is compatible with 3S-6S LiPo. It also provides a 12v-regulated output that is used to power the autopilot and FPV systems. The sensor ships with XT60 connectors pre-installed so for most people it will be a plug and play installation.

Usage:

• Connect current sensor wire to the "Cur" and "JMP" port on the autopilot (remove factory installed Jumper from the "JMP" port)
• 4S-6S LiPo: Leave Jumper in factory default position ">3S"
• 3S LiPo: Connect Jumper to "3s=POW" this disables the voltage regulator so that your 3S LiPo provides the output power (~12V).

Please note: This power module is compatible for use with the Arkbird 2.0 Autopilot System only.