30A Multirotor ESC 2S - 4S with 5V 2A BEC (SimonK Firmware)

This 30A speed controller has been developed and setup specifically for multirotor use, so no programming required. Unlike generic helicopter / aeroplane ESCs, this ESC come preloaded with multirotor specific firmware preinstalled. Best still, it's not just any old firmware; it's the highly regarded SimonK firmware, which is optimised for multirotor applications. Google 'SimonK firmware' and you'll come across lots of forum posts singing its praises. It's designed to improve throttle precision but most importantly it can radically improve flight stability. It works by increasing the ESC refresh rate, in simple terms this means a SimonK ESC tells the motor what to do much more frequently than a non-SimonK ESC. The end product is a more 'locked in' feel, as the motors are able to make faster adjustments to the flight controller commands.

This particular ESC is rated at 30amps (35amp burst) and it supports 2S to 4S (11.1v - 14.8v) operation. It's well suited to medium sized quadcopters and hexacopters. We recommend pairing this ESC with motors like the Tarot 4006 620KV.

Features:

• Developed specifically for multi rotor use
• Smooth, linear and precise throttle response
• Extreme low output resistance, super current endurance
• Supports high RPM motors
• Safe start, motor will not run until ESC is armed correctly
• N-FET design
• No low voltage cutoff - essential for multirotors
• Includes 5V 2amp BEC
• Soldered with 3.5mm gold female plugs