Matek AIO F4 Flight Controller ( Intergreted PDB 4*30A , Bateflight OSD , BEC 5V/2A , SD Card Slot , VCP+5x UARTs , Current Sensor 184A ) for FPV Racing RC Drone Quadcopter by LITEBEE

MCU: STM32F405(168MhZ). IMU: MPU6000 accelerometer/gyro (SPI); Blackbox: MicroSD card slot (SD/SDHC); VCP, UART1, UART2, UART3, UART4, UART5

OSD: BetaFlight OSD w/ AT7456E chip; PDB Input:6～30V (3～6S LiPo) w/TVS protection, 4x30A (Max.4x46A); BEC: 5V 2A cont.(Max.3A)

Supplied by MATEKSYSTEM, all of our product is original Matek product, high quality !

More specification: http://www.mateksys.com/?portfolio=f405-ctr#tab-id-2

If you use the SD BlackBox and get some issues. INAV1.8.0_MatekF405 listed in INAV configurator can' t support F405-CTR. Pls download it here:www.mateksys.com/Downloads/FW/inav_1.8.0_MATEKF405.hex

FC Specifications
MCU: 168MHz STM32F405
IMU: MPU6000 accelerometer/gyro (SPI)
Baro: BMP280 (I2C)
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on TX2, S5 or S6 optional
Camera control on S6 or DAC optional
Smartaudio & Tramp VTX protocol supported
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes

PDB Specifications
Input: 6~30V (3~6S LiPo) w/TVS protection
PDB: 4x30A (Max.4x46A), 6 layers*2oz copper PCB
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.300mA for Spektrum RX
Current Sensor 184A (Scale 179)
Battery Voltage Sensor: 1:10 (Scale 110)

3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
6x PWM / DShot outputs without conflict
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x pair I2C1 pads
1x Side-press button for BOOT(DFU) mode
36x46mm PCB with 30.5mm mounting holes
10g

w/ 1x Rubycon ZLH 35V/470uF (Low ESR)
w/ 6x silicon grommets M4 to M3
w/ 1x FR4 PCB Plate 36*36*1mm