LITEBEE F3 Flight Controller V2 Integrated OSD (SBUS/PPM Input, 8PWM Output, SD Card Solt, 2-4S Lipo Direct Power, 8 Pin 4in1 ESC Port) for PFV Racing RC Drone Quadcopter by

Based on F3 flight controller, using F3 STM32 F303 MCU, Runs Betaflight 3.0 firmware, OSD over SPI bus in DMA mode, Betaflight OSD Configuration has been included. in Betaflight GUI.

Supports SD Card and 2-4S Lipo Direct power ( SBEC, not LDO ), SPI Sensor MPU6000, optional Barometer BMP280

SBUS/PPM input (Pinheaders), 8PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders), 8pin 4in1 ESC Port (Current, VBAT and PWM1234 )

Please read through the guide to better understand the settings https://gist.github.com/nathantsoi/ee8adb244e62fb4f128e840c785828a4

Let you know this flight controller better, here is the link of professional review by Nathan: http://nathan.vertile.com/blog/2016/07/07/-typhoon-miniquad/flight-controller-setup

Note:
Please update your firmware when you get your new board! Even though all boards ship with Firmware 3.0.0 and up, you'll want to make sure you flash your board to the latest version of BetaFlight because some boards, even if they say firmware version 3.0.0 may have early, release candidate firmware instead of the final version. Update your board before doing anything else! It's easy, just follow the link: http://nathan.vertile.com/blog/2016/07/07/-typhoon-miniquad/channels

Details:
A new generation AIOFlight control for FPV, based on F303 MCU, using F3 MCU controls OSD over SPI bus in DMA mode,OSD Configation has been incl. in Betaflight GUI.
Supports SD Card and LIPO direct input (2-4S), New design with SBEC
MPU6000 at SPI bus

Features:
STM32 F303 MCU, Runs Betaflight 3.0 firmware
SBUS/PPM input (Pinheaders)
8PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
Only 36x36mm, mount holes 30.5x30.5mm
optional Barometer BMP280
SPI Sensor MPU6000
SD Card solt
2-4S Lipo Direct power (SBEC, not LDO)
8pin 4in1 ESC Port(Current, VBAT and PWM1234)
Package Including
1 * AIO F3 V2 Flight Controller