Powerbox Systems Professional (4330)

The PowerBox Professional is a modern power supply system which contains all the electronic components required for today's receivers, servos and models. Every component needed for a totally secure airborne power supply, including ICs, micro-controller and electronic circuits, is duplicated!

This High-End power supply system features an outstanding range of the latest innovations, including a high-resolution graphic OLED screen, four match-channels catering for eight servos, and the facility to bind to the downlink channels of various manufacturers.

Features

High-resolution graphic OLED screen with 128 x 64 pixels
Ultra-simple menu-based programming system using the Sensor-Switch Signal amplification for a total of eight channels and twelve servos
Synchronised servo output: all servos operate totally synchronously
16-bit processor for high-speed, high-resolution signal processing
Four match-channels, each for two servos; all servos separately variable
Double regulated output voltage
Sockets for Multiplex MSB and Spektrum downlink bus systems, update capability with USB Interface Adapter for other systems
Direct transmission of both battery voltage values to the transmitter
Voltage display for each battery separately
Servo voltages can be set to 5.9 V or 7.4 V
Minimum value memory displays any voltage collapses
Combined heat-sinks permit high regulator power
Voltage regulator monitor
Supports four battery types: LiPo, LiFePo, NiMH, NiCd
Suppression of any servo feedback currents which may occur
Can also be switched on and off using the MagSensor Update-capable using the PowerBox USB Interface Adapter
Specification
Operating voltage: 4,0V - 9,0V
Power supply: 2 x 5s NiMH/NiCd, 2s LiPo, 2s LiFePo
Current drain: approx. 130mA
Idle current: approx. 15µA
Output voltage: 5,9V or 7,4V stabilised
Max. load current: Peak 2x20A
Dropout voltage: 0,3V
Receiver: 1 via parallel inputs
Supported telemetry systems: DSM2/DSMX, M-Link
Channels: 8, 4 of them programmable
Servo outputs: 12, 8 of them programmable
Servo signal resolution: 0,5µs
Selectable signal frame rates: 9ms, 12ms, 15ms, 18ms, 21ms
Integral screen: OLED graphic panel 128x64 pixels
Dimensions: 110x72x24
Weight incl. switch: 130g
Temperature range: -30°C to +75°C