The Micro PDB has been engineered to provide the highest possible performance and reliability in a 32*22mm & 4 layers PCB.
It distributes power from a battery pack to 4 ESCs, as well as providing dual synchronised & regulated DC outputs for powering
Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc.
It offers a very compact solution to achieve 2A continuous output current over a wide input supply range(3S to 5S LiPo).

• Brand: Matek
• Item Name: Matek Micro PDB With 5V 12V Dual BEC Output
• Input voltage range (3S-5S operation): 7 – 21V DC
• Regulated 5V and 12V outputs
• LED power indicators ( 5V & 12V outputs )
• 4 ESC outputs

• Continuous current: 20A per output
• Peak current (10 seconds/minute): 25A per output

BEC 5V output:

• Designed for RC Receivers, Flight controllers, OSD, and Servos.
• DC/DC synchronous buck regulator.
• Voltage: 5.0 +/- 0.1VDC
• Continuous current: 2 Amps (Max.2.5A 5s/minute)
• Output Ripple: 40mV (VIn=16V, [email protected] load)
• Short-circuit tolerant (5 seconds/minute)

• The battery should be 4S~5S LiPo (12.8~21V DC)
• Standard output designed to power cameras and video transmitters,etc.
• DC/DC synchronous buck regulator, Efficiency is up to 96%.
• Voltage: 12.0 +/- 0.2VDC
• Output Ripple: 20mV (VIn=16V, [email protected] Load)
• Continuous current: 2 Amps (Max.2.5A 5s/minute)
• Short-circuit tolerant (5 seconds/minute)

• Output voltage= 3S LiPo voltage x 95%
• Dimensions: 32 x 22 x 3 mm
• Weight: 3.5g

• 2oz copper & 4-layers PCB.
• ESC & Battery solder tabs in pairs
• 5V & 12V Output LED indicators & Short circuit tolerant
• Micro size & lightweight

• 1 x Matek Micro PDB With 5V 12V Dual BEC Output