Jumper T12 PLUS OpenTX Multi-Protocol Radio

Radio Features:

• JumperTX (an open source Firmware set based on the OpenTX Project)
• JR/FrSKY compatible module bay on rear side
• USB online firmware upgrade
• Ultra-low power consumption, longer battery life
• Channels: up to 16 channel output
• Wide voltage input (2s lipo recommended)
• Multilingual menu
• Vibration reminder function
• Support telemetry (depending on the receiver)
• Crossfire CSRF Compatible: Yes
• LUA Script support: Yes

Radio Specs:

• Radio MCU: STM32F205VET6 (512kb)
• Size: 158 * 150 * 58
• Weight: 342g (without battery)
• Working voltage: DC5-DC9V (factory with 4 * AA battery box, 2s Lipo recommended, batteries not included)
• Firmware: JumperTX (an open source Firmware set based on the OpenTX Project)
• Channels: up to 16 channel output
• Display: 1.7-inch LCD display, 128* 64 resolution
• Gimbal Type: HALL Sensor
• JR/FrSKY compatible module bay on rear side
• Upgrade method: USB online upgrade
• Simulator mode: 3.5mm standard ppm output or USB HID
• Voice support: YES

Jumper JP4-in-1 Module

The Jumper JP4IN1 Module features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board. This module can convert standard PPM signals form module equipped radios in to the RF protocols used by most radios in the market today (See RF Chip data below). This module is plug and play with module equipped radios in the FrSKY series and requires no complex wiring or “hacking” to get running. The module is a great way to improve the enjoyment of your flying experience, using a better radio such as the FrSKY Taranis series rather than the low grade radios commonly included with most kits offers an night and day difference in performance. The Jumper JP4IN1 module is also upgradable via USB input

JP4-in-1 Specifications:

• Working voltage: 6-9v
• Working current: <=100ma
• Operating frequency: 2.4G ISM band
• RF power: +22DBM
• Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
• Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna)
• Net Weight: 42g (including antenna)
• Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x
• Firmware updatable: Yes, via USB.