Hobbywing FlyFun 80A Opto Brushless ESC (No BEC)

Specification

• Output: Continuous 80A, Burst 100A up to 10 Secs.
•  Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
• BEC: None. (This ESC does not have a BEC, so a stand-alone BEC or separate receiver battery is required)
• Size: 70mm (L) * 31mm (W) * 14mm (H).
• Weight: 69g.

Features

Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.

Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to their default settings.
Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.